`
- 浏览:
653358 次
-
mini6410移植全攻略(10)--linux2.6.39 移植之搭建框架(下)
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.39 (root@bootloader) (gcc version 4.4.1 (Sourcery G++ Lite2009q3-67) ) #1 Mon Dec 12 20:29:17 CST 2011
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: TH6410-muge0913
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
camera: no parent clock specified
S3C64XX: PLL settings, A=667000000, M=533000000, E=24000000
S3C64XX: HCLK2=266500000, HCLK=133250000, PCLK=66625000
mout_apll: source is fout_apll (1), rate is 667000000
mout_epll: source is epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 533000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
usb-bus-host: source is clk_48m (0), rate is 48000000
uclk1: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
camera: no parent clock specified
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: root=/dev/mtdblock2 rootfstype=yaffs2 init=/linuxrcnconsole=tty1 console=ttySAC0,115200
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 127192k/127192k available, 3880k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff600000 -0xffe00000 ( 8 MB)
vmalloc : 0xc8800000 - 0xf6000000 ( 728 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0022000 (104 kB)
.text : 0xc0022000 - 0xc024dc88(2224 kB)
.data : 0xc024e000 - 0xc0271200 (141 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:246
VIC @f6000000: id 0x00041192, vendor 0x41
VIC @f6010000: id 0x00041192, vendor 0x41
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 666.41 BogoMIPS (lpj=3332096)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
s3c64xx_dma_init: Registering DMA channels
PL080: IRQ 73, at c8808000, channels 0..8
PL080: IRQ 74, at c880c000, channels 8..16
S3C6410: Initialising architecture
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 65 KHz
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
ROMFS MTD (C) 2007 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
start plist test
end plist test
s3c-fb s3c-fb: window 0: fb
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
brd: module loaded
................
分享到:
Global site tag (gtag.js) - Google Analytics
相关推荐
QT6410移植linux-2.6.39 笔记(一)-搭建开发板环境
QT6410移植linux-2.6.39 笔记(二)-添加NANDFLASH分区
移植linux2.6.39到mini2440,tftp启动,挂载nfs文件系统,内有使用busybox制作根文件系统的过程。
QT6410移植linux-2.6.39 笔记(三)-构建cramfs根文件系统(1)
QT6410移植linux-2.6.39 笔记(三)-构建cramfs根文件系统(2)
找了好久才找到的,国内还没有有下载 linux vmware patch linux ubuntu 11.04 11.10 vmware linux-2.6.39 and linux-3.0.1 patch vmware补丁
O0 编译,使用eclipse 调试,源代码分析书籍 《ARM Linux内核源码剖析.pdf》分析启动代码 2.6.30
安装sourceinsight_4.0.86.0-setup以及使用全部所需文件,按照步骤来,本人亲测。
linux2.6.39的dm9000驱动
linux2.6.39 yaffs2 驱动
linux内核编译2.6.39linux内核编译2.6.39linux内核编译2.6.39linux内核编译2.6.39linux内核编译2.6.39linux内核编译2.6.39linux内核编译2.6.39linux内核编译2.6.39linux内核编译2.6.39linux内核编译2.6.39linux内核...
解决linux内核版本2.6.39下安装vmware后无法编译模块的问题
linux-2.6.39内核源码的补丁,和大家分享
U_Boot及Linux2_6在S3C2440A平台上的移植方法.
linux2.6版内核,有一定的学习价值,大多数开发板基于此版本进行系统移植,因为官网下载的太慢也不好找,所以传上来供有需要的朋友下载。
linux-2.6.39.tar.gz源代码,Linux移植学习,Linux嵌入式学习
iproute2 的2.6版本! 用于linux下的源码包
TYPE_MICRO2440,之前的Linux内核中有MICRO2440的机器码,值为2680,但是最近的内核,比如Linux-2.6.39中并没有这个值,虽然我自己是在Micro2440开发板上移植,但机器码还是使用MACH_TYPE_MINI2440,其值为1999。...
由于作者水平有限,因此不能保证作品内容准确无误,请在阅读中自行鉴别。如果你发现了作品中的错误,请您来信指出,哪怕是错别字也好,任何提高作品质量的建议我都将虚心接纳。如果你愿意就作品中的相关内容与我进行...
自己做了一个2.6.39的mac的patch